just  

Load/Force Transducers
For Measurement of Load and Force

datasheet

 

Universal Load Cells   - AL4U-xxxK

datasheet

AL4U series load cells are larger capacity strain gauge based force transducers, which are used for static and dynamic force measuring applications. They can measure both tensile and compressive forces. Constructed in stainless steel body, these load cells can be used in harsh industrial environment without degradation in performance. Accessories It include tension adapter, mounting, base,   hook, eye -bolt, shackle, universal rod end  and load button are available (*at extra cost)  for load cells of all standard ranges given below. Special accessories can also be designed and manufactured for specific applications.    Specifications           Standard Ranges Specifications   2 tons 5 tons 10 tons 20 tons Rated output 0.9 to 1.25 mv/V P P P P Non-linearity < ± 0.5 % P P P P Hysteresis < ± 0.1 % P P P P Repeatability < ± 0.1 % P P P P Temp. effect On Zero -- 0.025 %  per deg C P P P P Insulation Resistance 500 mega ohm at 50 Vdc P P P P Temp. Range 0 to 60 deg C P P P P Overload Capacity 150 % of rated P P P P Resistance 350 ohm ± 1 % P P P P No-load unbalance 5 % of rated o/p P P P P Electrical connection 5f, 4core, PVC jacketed, shielded cable, 3m P P P P   High Capacity Compression Load Cell   - AL1C-xxxT  datasheet AL1C-xxx T is a series of high capacity, strain gauge based load cells used for measurement of compressive force (load) in various testing applications. They are stable over the specified temperature range and exhibit linear characteristics over their total rated range. These load cells are supplied with their calibration certificates. AGMPL also manufactures different types of accessories to adapt these load cells to different applications. These include base plate, movable saddle and spherical seat. To enable you to display the measured values of load acting on the load cell, AGMPL offers Digital S/G Transducer Indicators with or without set point controls.  AI410 and AI450 are simple panel mount indicators and AI412 and AI452 are panel mounting indicators with set point control. AI472 are microprocessor-based Indicators with set point control and peak-hold facility. LD612 is a dual channel microprocessor based indicator, which can accept both load cell and displacement transducer on its two channels and is used where load-vs.-displacement characteristics are to be determined. Specifications MODEL AL1C-20T AL1C-50T AL1C-100T AL1C-150T Rated Capacity 20 ton 50 ton 100 ton 150 ton Rated Output 0.8 to 1.2 mV / V Non-linearity +/- 0.5 % of rated capacity Hysteresis 0.2 % of rated capacity Bridge resistance 350 +/- 3 ohm Allowable excitation 5 V DC Safe overload 500 mega ohm at 50 Vdc Temp. Range 0 to 60 deg C SafeOverload 150 % of rated capacity Temp. Coeff. 0.04 % of rated capacity per deg C Operating Temp. 0 to 55 deg C Electrical connection 4-core, screened, PVC jacketed cable; 3 -meter; with 5-pin MS connector   Compression Load Cell - AL3C5T datasheet AL3C5T is a precision load transducer designed to measure compressive force up to 50 KN. It is fitted with a hardened steel ball at its top for accurate point-load application on its sensing element. The sensing element is of stainless steel and heat treated to give stable, repeatable and linear output. This load cell finds application as force transducer in material testing and as load cell in aircraft weighing Applications: This transducer can be used with any measuring instrument which accepts strain-gauge based transducers.   Specifications Rated Capacity 50 KN Rated output(nominal)  1 mV/V Non linearity: < 0.3 % Hysteresis < 0.1 % Bridge resistance  350 ohm Allowable excitation 5 V DC Allowable overload 150 % of rated capacity Operating temperature 0 to 55 deg C Temperature coefficient < 0.02 % of rated capacity per deg C Cable 3 meter; 4-core screened; HR PVC sheathed; 5-pin MS connector at one end and flying leads at the other end

 ©2003 AG Measurematics Pvt. Ltd. All rights reserved.