|
|
AGMPL Material Testing Machines
catalogue.
Get your copy TODAY !!!
|
|
|
Spring Testing
Machine
For Testing
of Torsion Springs
|
|
Torsion-Spring Testing Machines
Model Series: TSTM 1 xxxM |
datasheet |
|
TSTM-1-xxx-M
are microprocessor controlled motorized test stands. These have been
designed to automate, simplify and standardize the strength and fatigue
testing of different types of Torsion springs in both clockwise and
counterclockwise direction. They are fitted with motorized lead screws
for cross head travel. Electronics Torque Transducer is used measure the
Torque and the angle Transducer to measure angle of rotation with a
resolution of 1 deg. Torque can be applied using front control panel
mounted push buttons or through the microprocessor based controller.
These controllers can also be linked to a PC through RS232 (serial)
port.
Application
Software, sTEST,
converts the test stand into a
Computerized Testing station.
Operator can view the material characteristics on the
VDU (monitor) and generate test reports through ink-jet printer.
Facility also
exists to display a reference or master curve in different color on the
monitor to allow instant assessment of the quality of the device being
tested.
AGMPL also manufactures
testing machines for
coil springs.
|
 |
Specifications
| Model |
TSTM 100M |
TSTM 200M |
TSTM 500M |
TSTM 1000M |
|
Torque capacity |
2100
N cm |
200 N cm |
500 N cm |
1000 N cm |
|
Measuring resolution |
0.1 N cm |
0.1 N cm
|
0.1 N cm
|
0.1 N cm
|
|
Common Specifications
for each TSTM
|
Rotation range
|
360
deg |
|
Angle measuring resolution |
1 deg |
Test
speed range
Standard - Model TSTM xxxM
|
0.2 to
1 minute per rotation |
|
Torque and angle display |
16
Character x 2 Line, Backlit, Alphanumeric, Dot Matrix
|
|
Mode of operation |
Auto-
Single cycle (through Controller),
Cyclic (up to user programmed
cycles between two user programmed angles.)
Manual ( Through
front panel push buttons and speed knob) |
|
Torque overload rating
|
150 %
of the rated Torque capacity |
|
Rotation control |
CW and
CCW pushbuttons or through controller |
|
Testing priority |
Torque
or Angle |
|
Computer linkup |
RS 232
(Serial port) |
|
Application Software
|
Stest
(Data Sheet available separately) |
|
Dimensions
|
Base-600 x 510 mm |
|
Construction |
Floor
standing with heavy duty tubular frame |
|